Microphone Accessories

Electro-Voice Active Antenna Multicoupler

Product Code: RE3ACCAASP

The AASP is a professional, wide bandwidth, active antenna splitter designed to function as the distribution hub of RF and DC power in a multichannel wireless microphone system. One AASP actively splits each incoming antenna signal (A and B) into four connected diversity receivers in the system without signal loss, as well as distributing DC to power each of the four connected...

Price N/A

Request Info

Electro-Voice Active Log Periodic Antenna to suit RE3

Product Code: RE3ACCALPA

The ALPA is an active directional antenna with switchable 3 dB and 10 dB of amplified gain, which increases the desired RF signal while rejecting unwanted RF signals. ALPA mounts on a standard threaded microphone stand for easy placement. Operates 470-960 MHzFeatures Extends System Range Switchable 3dB and 10dB Active Gain

Price N/A

Request Info

Electro-Voice Active RF Antenna Booster to suit RE3

Product Code: RE3ACCRFAMP

RFAMP is a 10 dB RF amplifier module designed to function as an at-antenna RF amplifier to compensate for signal loss prior to a coax run, as well as an effective means of remote mounting the RE3-RX stock ½ wave receiver antenna when desired. Operates 470-960 MHz. Features 10dB RF Booster Amp Module Powered by RE3-RX or AASP 12V DC Booster Feed Power

Price N/A

Request Info

Electro-Voice Battery Charger to suit RE3

Product Code: RE3ACCBC2

The BC2 is a 2-sided, 2-slot battery charging station for recharging optional NiMH rechargeable cells while in either the RE3-HHT or RE3-BPT transmitters.Features 2-slot Charger Charges RE3HHT / RE3BPT 3-hour Charging Time

Price N/A

Request Info

Electro-Voice Foam Windscreen to suit HM3

Product Code: WSH3

Foam Windscreen to suit HM3

Price N/A

Request Info

Electro-Voice Foam Windscreen to suit ND76 / 86 / 96

Product Code: 379-1

Foam Windscreen to suit ND76 / 86 / 96

Price N/A

Request Info

Electro-Voice Foam Windscreen to suit PL24 / 44 / 80C / 84S

Product Code: WSPL1

Foam Windscreen to suit PL24 / 44 / 80C / 84S

Price N/A

Request Info

Electro-Voice Foam Windscreen to suit PL33

Product Code: WSPL2

Foam Windscreen to suit PL33

Price N/A

Request Info

Electro-Voice Front Mount Antenna Cables to suit RM300

Product Code: SFMC300

The SFMC300 single front mount antenna coax kit is intended to be used with R300 rack mount receivers when using the RM300 single receiver rack mount kit to front mount receiver antennas. The kit contains two 20" RG-58 coax cables with the proper TNC connectors on each end to accomplish the task, along with an instruction sheet which customers may follow for trouble-free installation.Features...

Price N/A

Request Info

Electro-Voice Microphone Stand Adapter to suit HT300

Product Code: MSA300

Microphone Stand Adapter to suit HT300

Price N/A

Request Info

Electro-Voice Microphone Stand Adaptor so suit PL24S / PL80

Product Code: SAPL1

Microphone Stand Adaptor so suit PL24S / PL80

Price N/A

Request Info

Electro-Voice Microphone Stand Adaptor to suit PL33 / RE320

Product Code: SAPL2

Microphone Stand Adaptor to suit PL33 / RE320

Price N/A

Request Info

Electro-Voice Microphone Stand Adaptor to suit PL37

Product Code: SAPL3

Microphone Stand Adaptor to suit PL37

Price N/A

Request Info

Electro-Voice Passive Log Periodic Antenna to suit RE3

Product Code: RE3ACCPLPA

The PLPA is a passive directional antenna, which increases the desired RF signal while rejecting unwanted RF signals. PLPA mounts on a standard threaded microphone stand for easy placement. Operates 470-960 MHz.Features Extends System Range 10dB Passive Gain

Price N/A

Request Info

Electro-Voice Passive Splitter

Product Code: RE3ACCPASP

The PASP is a passive antenna splitter kit containing necessary items needed when splitting and sharing two incoming antenna signals between the diversity antenna jacks of two receivers. Operates 10 MHz to 1GHz.Features Splits 2x Antennas into 2x Diversity Receivers Passes 12V Booster Feed Low Insertion Loss

Price N/A

Request Info

Electro-Voice Polar Choice Adapter to suit RE3 Beltpack Transmitter

Product Code: RE3ACCPCA

The RE3-ACC-PCA is an accessory kit allowing the RE3 bodypack transmitter to be mounted into the Electro-Voice Polar Choice PC Boundary Sat and PC Satellite models, while also allowing the transmitter to be used in other traditional bodypack transmitter applicationsFeatures Adapts RE3BPT for use with Polar Choice Satellite Microphones

Price N/A

Request Info

Electro-Voice R300 Bodypack Transmitter - Band A

Product Code: BP300A

R300 Bodypack Transmitter - Band A (618 - 634 MHz)

Price N/A

Request Info

Electro-Voice R300 Bodypack Transmitter - Band B

Product Code: BP300B

R300 Bodypack Transmitter - Band B (678 - 694 MHz)

Price N/A

Request Info

Electro-Voice Rack Mount Kit to suit 2x R300

Product Code: RMD300

Rack Mount Kit to suit 2x R300 Receivers

Price N/A

Request Info

Electro-Voice Rack Mount Kit to suit 2x RE3s

Product Code: RE3ACCRMK2

Rack Kit for 2x RE3 Receivers

Price N/A

Request Info

Electro-Voice Rack Mount Kit to suit R300

Product Code: RM300

Rack Mount Kit to suit R300 Receiver

Price N/A

Request Info

Electro-Voice Rack Mount Kit to suit RE3

Product Code: RE3ACCRMK1

Single Rack Kit for RE3 Receiver

Price N/A

Request Info

Electro-Voice Rear to Front Mount Antenna Kit to suit RE3

Product Code: RE3ACCCXUF

The CXUF is a pair of high quality, low-loss coax cables intended to relocate a wireless receivers antenna input jacks to the front panel of a 19 rack. The threaded flange mount connectors fit securely into the openings of either the RMK1 or RMK2 rack mounting kits or AASP antenna splitter for front-mounting the stock ½ wave antennas or extension coax cables.Features 2x RG-58 50ohm Coax...

Price N/A

Request Info

Electro-Voice Stand Clamp to suit RE20 / 27ND

Product Code: 320

Stand Clamp to suit RE20 / 27ND

Price N/A

Request Info